privacy policy  |  imprint  | 
head10

Magnets and magnet systems


 

Permanent magnetic chucks with transverse pole spacing and increased magnetic power for heavy machining


By doubling up on the permanent ceramic magnet system, an even and more powerful chuck is created, which is particulary suitable for heavy duty machining. The solid design of the cast iron basic section an the stable hard-soldered top plate, as well as a ceramic magnet system, ensure an extremely long ans maintenance-free life.

Applications of this special design are:
Milling, shaping, grinding etc.

Curve of lines of force: approx 10 mm above the pole plate, consequently no magnetisation of the tools

Pole spacing: Steel 8 mm / Brass 5 mm
Holding powert: max. 120 - 150 N/cm² (≙ 12 - 15 kg/cm²)


Produc tvideo
This video will be loaded from Google YouTube.
Their privacy policy applies.

                       
drawing chucks for grinding

Article no. A B C D E F Number Execution Weight
mm mm mm mm mm mm of switches kg
BM 61.001 250 150 260 145 20 93 1 A 20
BM 61.002 300 150 310 145 20 93 1 A 24
BM 61.003 350 150 360 145 20 93 1 A 28
BM 61.004 400 150 410 145 20 93 1 A 31
BM 61.005 450 150 460 145 20 93 1 A 35
BM 61.006 500 150 510 145 20 93 1 A 39
BM 61.007 300 200 295 195 20 93 1 B 29
BM 61.008 400 200 395 195 20 93 1 B 39
BM 61.009 450 200 445 195 20 93 1 B 44
BM 61.010 500 200 495 195 20 93 1 B 49
BM 61.011 600 200 595 195 20 93 1 B 64
BM 61.012 800 200 795 195 20 93 2 B 92
BM 61.013 400 250 395 245 15 93 1 B 50
BM 61.014 450 250 445 245 20 93 1 B 57
BM 61.015 500 250 495 245 15 93 1 B 64
BM 61.016 600 250 595 245 13 93 1 B 78
BM 61.018 750 250 745 245 15 93 2 B 97
BM 61.019 800 250 795 245 15 93 2 B 103
BM 61.020 1000 250 995 245 13 93 2 B 129
BM 61.021 400 300 395 295 20 93 1 B 68
BM 61.022 500 300 495 295 20 93 1 B 85
BM 61.023 600 300 595 295 20 93 1 B 100
BM 61.024 800 300 795 295 20 93 1 B 130
BM 61.025 900 300 895 295 20 93 2 B 153
BM 61.026 1000 300 995 295 20 93 2 B 180


Further dimensions on request.

Machining of the upper plate possible without impairing the holding power (steel 15 mm / non-ferrous 7 mm). Attachment of the chucks to the machining table by means of clamping lugs. The chucks are supplied with 2 stops as standard.


You can prevent Google Analytics from collecting informations by clicking on the following link. An opt-out cookie will be set that prevents the future collection of your data when you visit this site: Disable Google Analytics OK