privacy policy  |  imprint  | 
Interior view of the warehouse of Beloh Magnetsysteme GmbH & Co. KG

Magnets and magnet systems


 

Electro magnetic chucks with transverse pole distribution especially for grinding and erosion work


Characteristics:
  • Uniform magnetic field
  • Guaranteed tightness, submersible in liquid dielectric
  • Pole spacing: Steel 20 mm / brass 4 mm
  • Holding power: 120 N/cm²
  • Ingress Protection: IP 67
  • Input voltage: AC 400 volt
  • Included: 2 stop strips and 4 m cable from the magnetic chuck to controlling


Electro magnetic chucks with transverse pole distribution especially for grinding and erosion work Drawing Electro magnetic chucks with transverse pole distribution

Art.-No. A B C Weight
mm mm mm kg
BM 66.010 400 200 85 50
BM 66.011 500 200 85 65
BM 66.012 600 200 85 78
BM 66.013 800 200 85 95
BM 66.020 500 300 85 99
BM 66.021 600 300 85 119
BM 66.022 800 300 85 158
BM 66.023 1000 300 85 198
BM 66.030 600 400 85 158
BM 66.031 800 400 85 211
BM 66.032 1000 400 85 263
BM 66.033 1200 400 85 316
BM 66.040 800 500 85 262
BM 66.041 1000 500 85 329
BM 66.042 1200 500 85 395
BM 66.050 800 600 85 316
BM 66.051 1000 600 85 395
BM 66.052 1200 600 85 474
Further dimensions on request.


Controlling for electro magnetic chucks


 Controlling for electro magnetic chucks (for magnetization and demagnetization of the electro magnetic chucks)

  • Metal housing
  • With remote control
  • Adjustment of holding force in 9 steps by key switch
  • Input voltage uniphase AC 400 V (max. 50 A)
  • With safety contact which prevent the machine from starting if the magnetic chuck is not turned on
  • Weight: 5 kg
  • Art.-No. BM 66.900 (1 channel control)


2 channel controls (for bigger electro magnetic chucks) on request.

You can prevent Google Analytics from collecting informations by clicking on the following link. An opt-out cookie will be set that prevents the future collection of your data when you visit this site: Disable Google Analytics OK