privacy policy  |  imprint  | 
head10

Magnets and magnet systems


 

EMX Lifting magnets

for use with flat and cylindrical pieces

New range of lifting magnets

- Powerful
- slim, light design
-  high safety factor
-  easy handling




Bipolar conception and great penetration power, even with large air gaps.

Safety blocking lever in both magnetised and demagnetised position. Designed for magnetising and demagnetising with only one hand. Smooth setback to the demagnetised position.

The safety coefficient is 3. Load detachment force is 3 times higher than the nominal force.

Easy to carry due to its low weight. Detachment force is between 70 and 115 times the weight.

The possibility to grind the magnetic contact poles, enable the maintenance and avoid the power loss due to knocks.

Constructed with neodymium (NdFeB) magnets which guarantee a long life for the lifting magnets under normal working conditions.

Lifting capacity*
Article no. Length Width Height Total Flat material Round material Flat material Capacity Weight
Height recom-mended recom-mended testet round bars
mm mm mm mm kN kN kN mm kg
BM 50.700 188 80 75 152 2,5 1,0 8,0* Ø 40-350 7
BM 50.701 262 100 95 185 5,0 2,5 16,0* Ø 60-400 17
BM 50.702 360 140 135 235 10,0 5,0 35,0* Ø 80-400 42
BM 50.703 485 180 170 299 20,0 10,0 64,0* Ø 150-500 92
*measured on a steel plate St37, polished, 60 mm thick
**Note: 1 kN equivalent 100 kg

The permanent lifting magnets are manufactured in the European Union. Supplied with test certificate, EC Declaration of Conformity and operating instructions.

Product video "Permanent lifting magnets"
This video will be loaded from Google YouTube.
Their privacy policy applies.


Product video "Measuring the holding force of permanent lifting magnets"
This video will be loaded from Google YouTube.
Their privacy policy applies.


Lifting capacity
Air gap 0,0 mm 0,1 bis 0,3 mm 0,3 bis 0,5 mm
Surface clean/flat grinded Rust/hot rolled uneven/rough
Article no. Sheet thickness Lifting capacity
max. kN
Lifting capacity
max. kN
Lifting capacity
max. kN
BM 50.700 ≥ 15 mm 2,50 1,50 1,25
10 mm 2,20 1,45 1,25
5 mm 1,00 0,80 0,70
Ø 50 mm 1,25 0,75 0,60
Ø 350 mm 1,25 0,75 0,60
BM 50.701 ≥ 20 mm 5,00 3,30 3,00
10 mm 3,30 2,50 2,30
5 mm 1,30 1,10 1,00
Ø 60 mm 2,50 1,65 1,50
Ø 400 mm 2,50 1,65 1,50
BM 50.702 ≥ 35 mm 10,00 7,90 7,25
20 mm 7,90 6,30 5,75
10 mm 3,85 3,50 3,25
5 mm 1,60 1,45 1,40
Ø 80 mm 5,00 3,90 3,60
Ø 400 mm 5,00 3,90 3,60
BM 50.703 ≥ 50 mm 20,00 17,50 16,00
25 mm 14,00 13,50 12,00
15 mm 9,00 8,50 8,00
Ø 150 mm 10,00 8,50 8,00
Ø 400 mm 10,00 8,50 8,00



EMX-SV Vertical lifting magnets

These lifting magnets are provided with a designed device to lift loads from horizontal into vertical position and vice-versa.

Suitable for load and unload in lathes and horizontal machining centers.

Magnet is adjustable to suit a range of diameters or widths.

The safety coefficient is 3. Load detachment force is 3 times higher than the nominal force.



Lifting capacity Lifting capacity
Article-no. A B C D E H L Flat material Flat material Weight
min.-max. min.-max. min.-max. min.-max. recommended testet
mm mm mm mm mm mm mm kN / kg kN / kg kg
BM 50.708* 188 210 767 200 - 500 10 - 100 200 - 500 200 - 1000 1,75/175 5,25/525 13
BM 50.709* 262 260 970 200 - 700 15 - 120 250 - 700 300 - 1000 3,50/350 10,5/1050 25
measured on a steel plate St37, polished, 60 mm thick

* Magnets used:
  - Art.-No. BM 50.708: EMX lifting magnet, Art.-No. BM 50.700
  - Art.-No. BM 50.709: EMX lifting magnet, Art.-No. BM 50.701
    - Dimensions see above table -



You can prevent Google Analytics from collecting informations by clicking on the following link. An opt-out cookie will be set that prevents the future collection of your data when you visit this site: Disable Google Analytics OK