Separation Systems

Magnet systems for the food and pharmaceutical industries

 

Permanent grid magnet in housing - type MAGBOX - semi-automatic

A semi-automatic version which is also available is even easier to clean. The cleaning procedure is as follows. The product flow is interrupted. The quick-action clamps are released, and the magnet system together with the stainless-steel jackets are slid out of the housing. Once the entire magnet unit has been slid from the housing the magnetic part is slid out of the extractor; the iron particles which are then released from the sleeves will fall down outside the housing.
The iron particles can then be collected separately.

All the standard MAGBOX systems are fitted with pre-drilled square flanges. Bakker Magnetics has a large range of standard adapter pieces which can be used to integrate the separators in all sizes of existing pipes. Since there are no dead ends or areas in the system, and all joints are welded, the units comply with all requirements imposed by the food industry. Automatically-cleaning variants
and/or systems for continuous processes are available on request. The same is applicable to rotary grid magnets.

SPECIFICATIONS
Execution: simple manual cleaning
Material: grade 1.4404
- Equipped with a dual-layer magnet system
- The magnetic bars are positioned at a centre-to-centre distance of 50 mm. 
- Equipped with a silicone seal
- Handles are fitted to the front and intermediate panels
- The cover is secured by two quick-action clamps with release button
- The rear of the housing is equipped with an earthing clamp
Surface treatment: electrolytic polishing
- Equipped with CE label