Magnet systems for the food and pharmaceutical industries
Chute magnet overpressure
Magnet systems of this type have been developed especially for use in pneumatic-transport systems operated at an overpressure. The standard unit is available in two dimensions,
i.e. a housing 150 mm square and a housing 200 mm square. The system is supplied with a separate receiving tray which must be slid into the opening at the base of the housing when cleaning the unit. This opening is hermetically sealed during the production process.
simple manual cleaning - permanent magnet
stainless steel grade 1.4404
2 plate magnets, type FDA in Neodymium
- The magnets are secured with 2 x 2 quick-action clamps released by pawls
- The rear of the housing is equipped with two earthing clamps
- Equipped with CE label
The standard magnet systems for the food and pharmaceutical industries are fitted with flat pre-drilled square connection flanges. A wide range of standard adapter pieces are available for the integration of these systems in an existing pipe. One end of these adapter pipes is fitted with
a pre-drilled square flange mating with the flange on the magnet system. The other end is fitted with a flat connection flange with a hole pattern in accordance with DIN2576.
Non-standard adapter pipes are available on request.