Privacy policy  |  Imprint  | 
Interior view of the warehouse of Beloh Magnetsysteme GmbH & Co. KG

Separation Systems

Magnet systems for the food and pharmaceutical industries


Chute magnets

The chute magnet system has been developed for the efficient removal of iron particles from raw materials which do not flow freely, such as powders, and tacky or oily  products, and/or scrap. The system is installed in one of the pipes used to transport the raw materials during the production process. The unit is located in a fully-welded stainless-steel housing which can be installed in the pipe in a manner such that it in effect constitutes an integral part of the pipe. To this end use can be made of the adapter pieces. See ......

Chute magnets are characterized by the location of the magnet poles outside rather than inside the product flow. Extremely powerful plate magnets located on opposite sides of the housing capture iron particles contaminating the product flow. These magnet plates are actually of a strength such that the external core is suitable for use with a column of material. The standard system is equipped with two intermediate panels which swivel together with the magnets. On swivelling the magnets further open than the intermediate panels the separated iron particles are released ready for collection. To prevent particles captured by the magnets from being
released into the product flow each intermediate panel is fitted with two sloping poles.

The overall height depends on the bore of the housing. Since no parts obstruct the product flow they are ideally suited to high-throughput systems. Chute magnets can, in consultation with Bakker Magnetics, also be installed at an angle. The BKM/VI chute magnet can also be used in pipes used for pneumatic transport at an underpressure. Please contact us for information about
maximum transport speeds.

simple manual cleaning - permanent magnet
Material: stainless steel grade 1.4404
Connection flanges: equipped with pre-drilled flat flanges
Magnetic section: 2 plate magnets, type FDA in Neodymium
- Fitted with silicone packings
- The magnets are secured with 2 x 2 quick-action clamps released by pawls
- The rear of the housing is equipped with two earthing clamps
- Handles are fitted to both magnets and intermediate panels.
- Equipped with CE label
Surface treatment: electrolytic polishing

Article no. A B C D E F G Weight
mm mm mm mm mm mm mm kg
BM 26.801 150 230 420 370 182 54,5 279 63
BM 26.802 200 280 500 450 232 84,5 389 109
BM 26.803 250 330 600 550 282 104,5 479 272
BM 26.804 300 380 600 550 332 104,5 529 317
BM 26.806 400 480 600 550 432 124,5 669 352

The standard magnet systems for the food and pharmaceutical industries are fitted with flat pre-drilled square connection flanges. A wide range of standard adapter pieces are available for the integration of these systems in an existing pipe. One end of these adapter pipes is fitted with
a pre-drilled square flange mating with the flange on the magnet system. The other end is fitted with a flat connection flange with a hole pattern in accordance with DIN2576.
Non-standard adapter pipes are available on request.

You can prevent Google Analytics from collecting informations by clicking on the following link. An opt-out cookie will be set that prevents the future collection of your data when you visit this site: Disable Google Analytics OK